| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Usage: | for Air Conditioner, for Manufacture, for Refrigerate, Construction Works |
|
Still deciding? Get samples of US$ 200/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Low noise oil smoke snail fan with high efficiency and energy saving
1. Fuction
11-62 series low-noise multi-wing centrifugal fan is designed for meeting the growing needs of industrial and environmental noise reduction. During design, the fan is used by a multi-objective design according to noise, efficiency, and other aerodynamic parameters, in order to realize the best performance of the whole fan with good aerodynamic performance. Impeller is to be strictly regulated by balancing, so that the fan possesses the features of steady working, low noise, little vibration, and long life. It is widely used to kitchen exhausting, fume extraction or ventilation purposes in canteens, hotels, restaurants, and other public places, and also be applied in food machinery, chemical machinery, plastics, machinery and other production devices.
2. Stype
Face from the motor side, the impeller whirls clockwise, which is called right rotation fan, shown "right", while the impeller whirls counterclockwise, called left rotation fan, shown "left".
The exit of the fan is shown by the outlet angle of case. The range of the outlet place is 0~180°, three kinds, which must be indicated when making order. Fan's transmission mode is A type.
3. Structure
The fan is mainly made up of impeller, chassis, inlet, motor and other parts.
Overall & Installation dimensions
Technical data
|
Size
|
Speed
|
Matching motor |
Volume Flow
|
Total pressure
|
Noise Db
|
|
(No.)
|
(r/min)
|
(Kw-P) |
(m3/h)
|
(Pa)
|
(A)
|
| 2 | 1450 | 0.37-4 | 1500-2000 | 380-300 | ≤56 |
| 2.25 | 1450 | 0.55-4 | 1136-2848 | 481-380 | ≤56 |
| 2.5 | 1450 | 0.75-4 | 1300-3300 | 450-350 | ≤65 |
| 2.8 | 1450 | 1.1-4 | 2200-5600 | 570-440 | ≤69 |
| 960 | 0.55-6 | 1430-3600 | 240-230 | ≤60 | |
| 3 | 1450 | 2.2-4 | 3000-5000 | 600-450 | ≤71 |
| 960 | 0.75-6 | 1800-4850 | 270-230 | ≤61 | |
| 3.2 | 1450 | 2.2-4 | 3400-8900 | 760-570 | ≤73 |
| 960 | 1.1-6 | 2180-5700 | 310-230 | ≤63 | |
| 3.5 | 1450 | 4-4 | 4500-9900 | 910-700 | ≤76 |
| 960 | 1.5-6 | 2900-6400 | 380-290 | ≤68 | |
| 4 | 960 | 2.2-6 | 4445-10500 | 522-395 | ≤73 |
| 3.0-6 | 4600-11800 | 550-440 | ≤75 | ||
| 4.5 | 960 | 4.0-6 | 6600-14880 | 555-440 | ≤76 |
| 5 | 960 | 4.0-6 | 8680-17880 | 815-616 | ≤77 |
| 5.5-6 | 9800-19300 | 920-640 | ≤79 | ||
| 6 | 720 | 7.5-6 | 13425-21473 | 1170-887 | ≤81 |
| 3-8 | 10068-16104 | 658-493 | ≤78 |
The centrifugal fan is based on the principle of converting kinetic energy into potential energy, using a high-speed rotating impeller to accelerate the gas, then decelerate and change the flow direction, so that the kinetic energy is converted into potential energy (pressure). In a single-stage centrifugal fan, the gas enters the impeller from the axial direction, the gas changes to the radial direction as it flows through the impeller, and then enters the diffuser. In the diffuser, the gas changes the direction of flow and the increase in the cross-sectional area of the duct slows down the gas flow, which converts kinetic energy into pressure energy. The pressure increase occurs mainly in the impeller, and secondly in the diffusion process. In a multi-stage centrifugal fan, a recirculator is used to move the airflow to the next impeller, creating a higher pressure.
Effect
Zhejiang Jiayi Fan Co., Ltd. was established in 2003. It is a modern private enterprise focusing on the research, development, production and sales of ventilation equipment. The company is headquartered in Daxi Town, Wenling City, Zhejiang Province, which is the "Hometown of Pumps in China", and has branches across the country; the production base is located in the East New District of Wenling City.
| A: How about your factory and product? |
| Q:we use high quality raw material for production, and 100% QC in producing process before the goods being packed up. we sincerely expect to work with you for long and stable time. |
| A: What's your warranty? |
| Q: we have one year warranty for different item. |
| A: Could I put my own logo on it? |
| Q: Sure, we can make your logo after you give us your authorization |
| A: If I have my ideas, do you have persons to design according to my concept? |
| Q: Certainly, our technology team is willing to do it for you. |
| A: What's your payment term? |
| Q: Paypal, Western Union, TT and LC at sight. |
| A: What's your shipping ways? |
| Q: For sample, we will choose express(DHL, UPS, TNT or FEDEX). For bulk goods, it will depends on you, by air or by sea via Ningbo or Shanghai port. |
| A: can I get a sample to check your quality and how long i can get samples? |
| Q: yes, welcome and sample will be finished as early as we can. |
){kind=link}